1. The controller is for indoor use only. See
information.
2. READ THE ENTIRE USER’S
MANUAL. OTHER IMPORTANT
MANUAL.
3. Keep this manual and all literature
safeguarded near the equipment.
During installation, testing, servicing
and troubleshooting of the equipment
it may be necessary to work with live
electrical components. Only a
qualified licensed electrician or
individual properly trained in handling
live electrical components shall
perform these tasks.
Standard NFPA-70E, an OSHA
regulation requiring an Arc Flash
Boundary to be field established and
marked for identification of where
appropriate Personal Protective
Equipment (PPE) be worn, should be
followed.
To Next Page
Loading...