AAON RSMV ASM01686 - Figure 6: Prism 2 Condenser Configuration - Single Condenser Per Module; Appendix A: Condenser Options; Single Condenser Configuration

26
RSMV Technical Guide
APPENDIX A: CONDENSER OPTIONS
Single Condenser Conguration
Figure 6: Prism 2 Condenser Conguration - Single Condenser Per Module
Single Condenser Per One Module
In Single Condenser Per One Module wiring conguration, the
Condenser Signal is wired to AO2 and the Condenser Relay (RLY3)
is enabled. Refer to Figure 6, below for Prism 2 conguration.
Modular Service Tool Screen
RSMV Condenser Options
Conguration Screen
RSM#1-4 CONFIGURATION
Condenser Options
1 Cond per 1 RSMV
USE < or > TO CHANGE
Select the “1 Condenser per 1 RSMV” option on the above Hand
Held Service Tool Screen.