Aastra 6753 - Using the Redial Function; Calling an Attendant; Calling an Internal Party by Name

Making a call
11
Using the redial function (redialling of the last number called)
The redial function (redialling of the last number called) allows you to redial automatically
the last number called.
Calling an attendant
*
(switchboard)
To reach the person who is responsible for the call reception service:
Calling an internal party by name
If you do not know your internal party's number, you can access it by entering their name
on the alphanumeric keypad.
The LEDs of the programmable keys associated with the call-by-name function light up,
provided that this function is available.
• Press the green key.
->
The phone automatically calls the party. The display shows the
number called.
When the called party answers, pick up the handset to talk.
* Depending on the programming performed by the system operator.
• Dial on the keypad 9 or .
When the operator answers, lift the handset to talk.
Phone in standby mode:
1. Press the key.
ABC...? 2. To enter the first two characters, press the corresponding keys
successively (also refer to "Alphanumeric keypad", Page 7).
• Press the key to erase the last character, if required.
9
☛