Multi-line function
37
Multi-line function
*
A multi-line phone has several directory numbers. Each directory number is stored on a
programmable key.
This function is mainly used to program on the same phone
• a standard number that you give to everyone.
• a private number that you only give to some people; this can also be a backup number.
Example:
For a manager - unfiltered private number
- number filtered by his assistant
For an assistant - private number for his/her own calls
- number intended to receive the manager’s filtered calls.
Note: This function will be programmed by your system operator.
Caution!
Your system operator has just programmed the multi-line function on your phone.
You can use the features assigned to your phone by assigning them to the directory num-
bers that you have, as you require. Each directory number can also be programmed in mul-
ti-key (managing enquiry calls).
A phone of 10 personal abbreviated numbers is assigned to each directory number. Exam-
ple: You have 20 personal abbreviated numbers for two directory numbers.
You have a voice mailbox associated to each directory number. Forwarding is pro-
grammed independently and with secret access codes that may be different.
* Depending on the programming performed by the system operator.
To Next Page
Loading...