Aastra 6753 - Other Functions; Squatt Function

"Do not disturb" function
47
Programming the "Do not disturb" function on a
programmable key
If this function is repetitive, you can store it on a programmable key.
1 - Press the Tools key.
2 - Press a programmable key.
8
3 - Enter the type code 8 or .
* 4 5
4 - Press successively the following keys: * 4 5 or .
5 - Press the key to finish.
The indicator associated with the programmed key goes off.
To activate the function:
You want to activate the "Do not disturb" function:
• Press the programmed key.
-> An audible message and the display indicate that the action
has been validated.
The indicator associated with the programmed key lights up.
You no longer receive any calls.
To deactivate the function:
You want to deactivate the "Do not disturb" function:
• Press the programmed key.
-> An audible message and the display indicate that the action
has been validated.
The indicator associated with the programmed key goes off.
You want to receive calls again.