Voicemail function
34
Consulting new messages
When a new message has arrived, the display shows
CALL BACK MAIL BOX
and the LED
of the message key flashes.
*
You want to consult your voicemail:
Press the key for direct access to the voice mailbox.
or
2 - Enter the voicemail number.
You can also successively press the keys
* 5 3
-> A voice prompt welcomes you to the voicemail and gives you the
different commands to access your voice mailbox. Simply follow
the instructions.
3 - Enter the voice mailbox number followed by # and/or the secret
code followed by # (*).
Note: we recommend storing this sequence on a programmable
key.
-> A voice prompt indicates the number of messages received.
The indicator goes out after the messages have been played.
To program the access codes to a key:
To make voicemail consulting easier, you can save your voice
mailbox access codes on a programmable key
(see "Programmable keys", Page 25). Therefore, after calling the
mail system, when the voice prompt asks you to enter the box n°
and or your secret code:
• Simply press the programmed key.
-> A voice prompt indicates the number of messages received.
* Depending on the programming performed by the system operator.
To Next Page
Loading...