Phone settings
52
Adjusting the volume level of the beeps heard when a key is
pressed
Each time a key is pressed, a beep is emitted. The volume level of this beep can be ad-
justed over 5 levels; the lowest level corresponds to no beep.
Personalising the phone’s secret code
To access certain functions (unlocking the phone, virtual desking function…) a secret code
is required. This code (different from the mail access code) is 0000 by default. You must
personalize this code before use (for example, to unlock the phone).
Phone in standby mode:
• Press the key to modify the volume level of the key
strokes. As soon as the beep suppression has been reached,
the next key stroke is accompanied with volume level 5.
-> After each key press, the new setting is played. The phone
stores the last setting.
* 0 6
1 - Press successively the following keys: * 0 6 or .
-> The display indicates "
CODE ?".
2 - Enter the current code.
Note: If it has not been personalised, the default code is 0000.
3 - Enter the new code twice in succession.
-> An audible signal and the display indicate that the action has
been validated.
Note: Remember this code; you will need it to access certain
functions.
☛
To Next Page
Loading...