Making a call
13
Using the store and redial function
If your party does not answer or is busy, you can temporarily record their number in order
to call them back later (even if you dial other numbers in the meantime).
To store the number:
Your party is busy or does not answer:
• Press successively the following keys: * 7 9 or .
-> An audible signal and the display indicate that the action has
been carried out.
This number remains stored until it is redialled or erased.
To call the stored number:
You want to redial this number:
• Press successively the following keys: * 9 9 or .
-> The phone automatically calls the stored number. When the
called party answers, pick up the handset to talk.
Note: You can also simply lift the handset and wait 5 seconds.
After the party has answered in callback mode, the number is no
longer stored.
To erase the stored number:
You want to erase the stored number (for example, in order to
store another number):
• Press successively the following keys: # 7 9 or .
-> An audible signal and the display indicate that the action has
been carried out. The number is erased.
To Next Page
Loading...