Ascotel® IntelliGate® 150/300 as of I7.9
140 Configuration
syd-0210/1.7 – I7.9 – 12.2009
• ATAS
Allows third-party applications to communicate with the PBX via the IP network
by means of the ATAS interface. This authorization is not intended for individual
persons.
• Remote maintenance using dial-up access
Allows remote maintenance using dial-up access in principle. Remote mainte-
nance itself (CM_1_2_1_4 "Remote maintenance") has to be enabled, too.
• Ascotel® Search
Allows changing the IP parameters visible in Ascotel® Search directly.
5. 3. 1. 5 User accounts during version transfers
In a version transfer older than I6.6 four user accounts are created instead of the
first-start user account ("Default User Account") and assigned to predefined author-
ization profiles. The older passwords are re-used and need to be changed during
the first login.
Tab. 72 User accounts during version transfers
Note:
Prior to I6.6 passwords are not case-sensitive; beginning with I6.6 pass-
words are case-sensitive (see "Password syntax", page 141). This is why
the passwords taken over during the version transfer are converted to
lowercase.
5. 3. 2 Passwords
To ensure that the PBX can only be configured with AIMS by authorized personnel,
access to both the PBX configuration and the PBX is protected by passwords. AIMS
and PBX password management can be synchronised.
Note:
AIMS keeps a list of user accounts and their assigned authorization pro-
files. When AIMS is started, a check is carried out to see whether the user’s
OS name (operating system name) is on the list of user accounts. If so, the
User account Password of the... Assigned authorization profile
installer Authorization level 3 Administrator
systemmanager Authorization level 2 Systemmanager
attendant Authorization level 1 Attendant
oip Authorization level 1 OIP
To Next Page
Loading...
