Aastra Ascotel IntelliGate 300 - Connecting the System; Direct Connection; Indirect Connection

Ascotel® IntelliGate® 150/300 as of I7.9
Installation 83
syd-0210/1.7 – I7.9 – 12.2009
4. 6 Connecting the System
There are two possibilities for connection to the telephone network and the termi-
nal-side cabling:
• Direct connection
• Indirect connection via (main) distribution frame and any universal building ca-
ble installation (UBC) (see also Fig. 32 and Fig. 33).
Fig. 29 Direct connection (left) and indirect connection (right)
On the front panel all the connections are made using RJ45 connectors.
4. 6. 1 Direct connection
The direct connection is with standard commercial cables. Details can be found in
the Chapter "Network Interfaces", page 88.
4. 6. 2 Indirect connection
There are two possibilities for connecting the system indirectly to the telephone
network and terminal-side cabling:
• Connection via main distribution board
• Connection to a universal building cable installation (UBC)
.4
.4
Ascotel
IntelliGate
-AIN
DISTRIBUTION
BOARD
.4
.4
Ascotel
IntelliGate