EasyManua.ls Logo

Aastra Ascotel IntelliGate 300 - Power Supply-Related Limits; Supply Power Available for Terminals

Aastra Ascotel IntelliGate 300
228 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ascotel® IntelliGate® 150/300 as of I7.9
Expansion Stages and System Limits 55
syd-0210/1.7 – I7.9 – 12.2009
SIP Terminals, unlimited
Aastra SIP Terminals, unlimited
VoIP Channels for Standard Media Switch, unlimited
GSM Terminals, unlimited
Aastra 5300 Series IP Terminals (Office IP Terminals), unlimited
Aastra 2380ip, unlimited
Analogue Modem
Enterprise Voice Mail
Enterprise Voice Mail Channels, unlimited
Auto Attendant
3. 5. 5 Power supply-related limits
The maximum number of terminals connected to the system can be limited by the
supply power available to the system. The power supply-related limit per terminal
interface must also be observed.
3. 5. 5. 1 Supply power available for terminals
The 40 VDC power supply required for the connected terminals is rated for the
power requirements of a typical system configuration.
The number of permissible terminals per system depends on the power require-
ments of the individual terminals. To check the power requirements refer to Tab. 19
for details of the average power requirements of the terminals. This check can also
be carried out automatically using the Project Manager.
The total power requirements of all connected terminals must not exceed the
power output of the power supply.
Tab. 18 Power output of the 40 VDC power supply
The table below shows the average power requirements of the terminals for a line
length of approx. 200 m and a wire diameter of 0.5 mm.
A150 basic system A300 basic system
Available power output 24 Watt 24 Watt

Table of Contents

Other manuals for Aastra Ascotel IntelliGate 300

Related product manuals