Aastra Ascotel IntelliGate 300 - Wiring Adapter Malfunction Mode; Warning Mode

Ascotel® IntelliGate® 150/300 as of I7.9
Operation and Maintenance 187
syd-0210/1.7 – I7.9 – 12.2009
Initialization values of the IP address data:
• IP address: 192.168.104.13
• Subnet mask: 255.255.255.0
• Gateway: 0.0.0.0
6. 5. 4. 6 Wiring Adapter Malfunction Mode
The system switches to this mode if an unsuitable wiring adapter is fitted into one
of the wiring adapter slots. This also applies to situations in which a LAN switch
module is combined with an unauthorized interface card (non-AD2 terminal card).
Missing wiring adapters are also indicated.
The Wiring Adapter Malfunction Mode is indicated by one or more red flashing
LEDs F1...F4. The LED number corresponds to the number of the Wiring Adapter
slot concerned. The SYS-LED flashes green as in the Normal Mode.
Tab. 92 Example pattern for Wiring Adapter Malfunction Mode
6. 5. 4. 7 Warning Mode
The system switches to the Warning Mode if a problem occurs that impairs the sys-
tem’s normal operation. The Warning Mode is indicated by the red-green flashing
SYS-LED and is exited only once the problem is remedied.
The different warnings are binary coded and are indicated by the LEDs (F0...F4).
Tab. 93 Warning Mode combination patterns
Pattern
No.
F0 F1 F2 F3 F4 SYS Meaning
20 Incorrect or missing wiring adapter in slot
WA2
F0 F1 F2 F3 F4 SYS Error
Category /
Description
Remedy
Fan out of opera-
tion
Check connections or
replace fan
Oscillator Tuning
Block missing (can
cause DECT prob-
lems)
Contact Support. The
Oscillator Tuning Block
has to be loaded.
n n
2
n
n n
'
n
n n n n
2 2'
n n n
2
n
2'