Ascotel® IntelliGate® 150/300 as of I7.9
162 Operation and Maintenance
syd-0210/1.7 – I7.9 – 12.2009
See also:
For information on event messages and signal destinations, see "Event
message concept", page 191.
Initiating an upload process
To ensure a successful software upload, carry out the following preparatory steps:
1. Recommendation: Use AIMS to save the configuration data (Tools → Backup).
2. If necessary: Save the wave files (Voice Mail, Courtesy and Music on hold) (Tools
→ Partial download → Download wave files).
3. Call up the AIMS Upload Manager.
4. Select the "Configuration" tab.
5. Enter user name and password (changed) of a user account.
Note: To perform the upload, the user account must be assigned an authoriza-
tion profile for which the "FTP" interface access is enabled (see "User Access Con-
trol", page 137).
6. Select the system type.
7. Click the "Add" button in the "Software" field and specify the zip file with the sys-
tem software you require.
→ The software version you have added appears in the list box.
8. Select the software version you want from the list box.
9. Select the PBX connection.
10.Use the "Settings" button to set the connection parameters.
11.Select the Upload tab.
12.Set the time at which you want the newly loaded system software to be acti-
vated.
13.Set the period of time during which you want the newly loaded system software
to be monitored for fault-free operation.
14.Click the "Upload" button.
→ The upload process is now initiated.
Bar indicator
During the software upload a dialog box with a horizontal bar indicates the time
progress of the upload process.
To Next Page
Loading...
