Aastra Clearspan 6757i - Configuration Complete; Idle Screen; Incomplete Configuration; Figure 3 Idle State Screen

___________________________________________________________________________________________
CS 6757i IP PHONE USER GUIDE V3.2.2 AASTRA - 2788-003
CLEARSPAN® IS A REGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD. PAGE 21 OF 116
3.2.3 Configuration Complete
When the configuration update is complete, the phone displays the following screens:
Network
80%
DSP
92%
SIP
94%
Done
3.2.4 Idle Screen
The idle screen displays when your 6757i startup process is completed.
MoreSpd 100
Callers Weather
Services DND
L1 John Smith
1 Missed Call
08/29/11 2:19pm
Voice Mail
Call Forward More
Callback
Intercom CLID Block
1000
Figure 3 Idle State Screen
3.2.5 Incomplete Configuration
If your phone displays an "Incomplete Config" message without any extension or user name at the
end of the start-up sequence instead of an Idle state screen, this indicates the phone configuration
that was downloaded from the configuration server is not complete or correct. Contact your System
Administrator for assistance.