Aastra Clearspan 6757i - Ending a Phone Call

___________________________________________________________________________________________
CS 6757i IP PHONE USER GUIDE V3.2.2 AASTRA - 2788-003
CLEARSPAN® IS A REGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD. PAGE 61 OF 116
Switch between the speaker and handset in speaker audio mode:
1.
 Lift the handset to go back to the handset.
 Press the Speaker key to switch back to the speaker.
Switch between the speaker and the headset in speaker/headset audio mode:
1.
Press the Speaker key.
5.7 Handle Calls Using a Headset
Ensure that you have selected a headset audio mode by accessing the Options list. For more
information on how to set this audio option in your phone, see the Set Audio option.
Step
Action
1.
Plug the headset into the jack.
2.
Press the Speaker key or the line appearance key to get dial tone or to answer an
incoming call.
Depending on the audio mode selected from the Options list, a dial tone or an
incoming call will be received on either the headset or the speaker.
Also see Headset Volume.
5.8 End a Call
Step
Action
1.
From a connected call:
 Press the Goodbye key.
Or
 Press the Drop softkey.
Or
 Place the handset back on hook.