Aastra Clearspan 6757i - Directed Call Pickup with Barge-In; Last Number Redial; Autodial (Hotline and Warmline)

___________________________________________________________________________________________
CS 6757i IP PHONE USER GUIDE V3.2.2 AASTRA - 2788-003
CLEARSPAN® IS A REGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD. PAGE 75 OF 116
6.9 Directed Call Pickup with Barge-In
Directed Call Pickup with Barge-in functions the same as Directed Call Pickup and allows you to
pick up a call ringing at another extension in the same group. However, it also allows you to barge
in on the call if the call was already answered. When the barge-in occurs, a 3-way conference call
is established between the parties. You, as the Barge-in user, have control of the conference.
Step
Action
Result
1.
 Press the Directed Call Pickup
Barge-In key.
Or
 Dial the Directed Call Pickup
Barge-In key.
You hear dial tone.
2.
Dial the extension of the ringing party.
You are connected to the call.
6.10 Last Number Redial
You can redial the last number you dialed using the Redial key.
Step
Action
Result
1.
Lift the handset.
2.
 Press the Redial key 2 times.
Or
 Press the Redial key 1 time.
 Press the Dial softkey 1 time.
Or
 Dial the Last Number Redial
feature access code.
The last number you dialed displays on
the screen and is automatically dialed.
6.11 Autodial (Hotline and Warmline)
Your System Administrator can configure an autodial feature on your phone. If autodial is enabled,
the phone automatically dials a preconfigured number whenever it is off-hook. Depending on the
configuration specified by your Administrator, the Autodial functions as either a “hotline”, or as a
“warmline,” as follows:
 Hotline: The IP phone immediately dials a preconfigured number when you lift the handset.
 Warmline: The IP phone waits for a specified amount of time after you lift the handset before
dialing a preconfigured number. If you do not dial a number within the time allotted, then the IP
phone begins to dial the number.