Aastra Clearspan 6757i - Park and Pickup; Default Display; Use Park and Pickup

___________________________________________________________________________________________
CS 6757i IP PHONE USER GUIDE V3.2.2 AASTRA - 2788-003
CLEARSPAN® IS A REGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD. PAGE 71 OF 116
6.4.1 Park and Pickup
The Call Park feature allows you to park a call so that any member of the group can retrieve it.
A call can be parked against any number in the group, including your own number.
You can only have one call parked at a time.
A 45-second timer is started when you park a call. If the timer expires and your line is idle, the
system rings your line. If you line is not idle, the timer is restarted for 10 seconds and the call
remains parked. This procedure is repeated until your line is idle, or the parked call is retrieved or
released.
6.4.2 Default Display
 The Park softkey is visible only when a call is connected.
 The Pickup softkey is visible only the phone is idle or when the phone is off hook.
6.4.3 Use Park and Pickup
Step
Action
Result
Park a Call:
1.
From a connected call:
Press the Park softkey.
The feature access code for Park is
dialed and you hear instructions given by
the system.
2.
 Dial the number where you want to
park the call plus the key.
Or
 Dial to park the call against
your number.
If the call is parked successfully, you hear
the message “Your call has been Parked.
Thank you.”
3.
 Hang up the handset.
Or
 Press the Goodbye key.
Pick up a Parked Call:
1.
Lift the handset.
The Pickup softkey appears.
2.
Press the Pickup softkey.
You hear the instructions given by the
system.
3.
 Dial the number where the call was
parked plus the key.
Or
 Dial to pick up a call parked
at your own number.
You are connected to the parked call.