Aastra Clearspan 6757i - Message Waiting Indicator Lamp; Volume Keys; Call Timer

___________________________________________________________________________________________
CS 6757i IP PHONE USER GUIDE V3.2.2 AASTRA - 2788-003
CLEARSPAN® IS A REGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD. PAGE 30 OF 116
3.14 Message Waiting Indicator Lamp
The Message Waiting Indicator (MWI) lamp is located at the top right of the phone.
MWI LED Status
Description
Slow Flash
You have a new message (s).
Rapid Flash
You have an incoming call.
Even Flash
One or more calls are on hold.
3.15 Volume Keys
You can adjust the volume on the receiver, headset, speaker, and ringer using the Volume keys.
Step
Action
Result
Set Ringer Volume:
1.
Leave the handset in the cradle.
2.
Press the Volume keys .
The Ringer displays on the screen and
you hear the current ringer volume.
You can also set the volume to OFF.
Set Handset Volume:
1.
Lift the handset
You hear dial tone at the current sound
level.
2.
Press the Volume keys .
The Handset volume indicator displays
on the screen. The handset remains at
this volume until it is adjusted again.
Set Headset Volume:
1.
Press the Volume keys
while on a call.
The Headset volume indicator displays
on the screen. The headset remains at
this volume until it is adjusted again.
Set Speaker Volume:
1.
Press the Volume keys
while on a call and talking on the
Speaker.
The Speaker volume indicator displays
on the screen. The speaker remains at
this volume until it is adjusted again.
3.16 Call Timer
This timer displays the elapsed time of a call.