51BusinessPhone – Dialog 4224 Operator / Dialog 3214
Call Metering
Integrated System Check
To avoid a loss of the counter values during reconfigurations of the
system, an Integrated System Check offers you the opportunity to
read out all the counters which were not reset before the
reconfiguration. To initiate the System Check you need a special
authority level (please ask your system administrator if this feature
is available on your phone).
*45# Dial.
(Same procedure as used for reading out accumulated cost.)
check Press to initiate a system check (see display).
When a fault is found the following information will be shown:
display Press to display the fault records (see display).
The display shows the first fault record in the system. The display
information includes the extension numbers which have been
deleted during the reconfiguration and the related cost for these
extensions.
next Press to step through the faulty records (see display).
cost/pulse Press to toggle between the indication in pulses or cost (see
display).