Factory Settings Authorisations
16
■ Call forwarding to internal or external numbers can be activated. Call for-
warding after delay is executed after 20 seconds. Door calls and MSN groups
can be forwarded. Call forwarding for other users and call forwarding by other
users are deactivated.
■ External calls can be transferred to an external subscriber.
■ Three-party conferences can be set up.
■ Call protection can be activated, call-waiting protection, announcement pro-
tection and pick-up protection can not be activated.
■ Transmission of one’s own phone number (MSN or system access number) can
be suppressed on a per-call basis.
■ The telephone lock can be activated. The terminal PIN is “0000”.
■ Interception of malicious callers is possible if this feature has been ordered
from the network operator.
■ The blacklist, the whitelist and a call filter are not pre-configured and thus not
active. If these lists are configured, they can be activated for the user groups. A
special list with emergency telephone numbers is preset and activated.
■ Call lists on terminals list internal calls, external calls, calls from the door and
calls that the user received while they were telephoning.
■ Function keys can be programmed on system telephones, no keys are locked.
■ The door opener can be operated from all terminals. Door calls can be for-
warded.
■ Connection data analysis is deactivated.
■ The cost multiplier is set to 100%, i.e. the costs are not multiplied by any factor.
There are no preset basic amounts for the charging of calls.
■ Speed dialling is possible, provided it has been configured in the
OpenCom 510 central telephone book.
■ Keypad dialling is possible.
To Next Page
Loading...