Aastra OpenCom 510 - Interfaces and Connectible Terminals; Overview

Interfaces and Connectible Terminals Overview
39
5. Interfaces and Connectible
Terminals
5.1 Overview
The OpenCom 510 interfaces have been implemented as RJ45 sockets on the front
of the interface cards and the central control module. No special proprietary
cables are required. Patch panels can be connected by means of standard patch
cables.
For technical information on the interfaces, refer to Modules starting on page 61.
The following terminals and systems can be connected to the OpenCom 510’s
interfaces:
Interface Card Properties Page
S
0
MX+S01-8 8 S
0
interfaces for either external or in-
ternal connections
76
S
2M
MT+S2M1-1 1 S
2M
interface for connecting to digital
networks (primary multiplex connec-
tions) or for cascading two PBXs
72
U
pn
MS+UPN1-8 8 U
pn
interfaces, U
pn
interfaces are not
DECT-capable
79
U
pn
MS+UPN2-8 8 U
pn
interfaces, U
pn
interfaces are
DECT-capable
79
a/b MS+A1-8 8 a/b interfaces 83
LAN MC+1-3 1 Ethernet port (10/100 Mbits/s)
(on central control module)
68
COM / V.24 MC+1-3 2 V.24 ports
(on central control module)
68