Modules Overview of Available Modules
63
7.2 Overview of Available Modules
The following table provides an overview of modules available for the
OpenCom 510:
The name of the module and the interface type are printed on the front of the
modules. The following illustration shows the printing on the MX+S01-8 interface
card.
Name Description Page
MPS+1-AC Power supply with AC/DC transformer 65
MC+1-3 Central control module with three interfaces 68
MT+S2M1-1 Trunk module with one S
2M
interface for connecting to
digital networks or for cascading two PBXs
72
MX+S01-8 Trunk or subscriber module with eight S
0
interfaces for
either external (trunk) or internal (subscriber) connec-
tions
76
MS+UPN1-8 Subscriber module with eight U
pn
interfaces for connec-
ting digital terminals (ISDN terminals, system telepho-
nes); does not support DECT base stations
79
MS+UPN2-8 Subscriber module with eight U
pn
interfaces for connec-
ting digital terminals (ISDN terminals, system telepho-
nes) and DECT base stations
81
MS+A1-8 Subscriber module with eight a/b interfaces for connec-
ting analogue terminals
83
MT+A1-4 Trunk module with four a/b interfaces for connecting to
analogue trunk lines
85
MG+ETH1-1 Media Gateway module for VoIP 118
To Next Page
Loading...