Configuration
87
8. Configuration
Configuration and programming of the OpenCom 510 is performed by the Confi-
gurator, a special software application integrated into the system. The Configu-
rator is operated via the Web console, which can be run on any PC connected to
the OpenCom 510.
The OpenCom 510 Web console
Using the Web console, you can:
■ perform the initial configuration of the OpenCom 510,
■ configure users of the OpenCom 510 and authorise them to use certain system
services,
■ carry out further system maintenance,
■ use PC-supported telephony functions,
■ read out call charge information,
■ access the OpenCom 510 telephone book.
The Web console has an integrated online help function that offers compre-
hensive information on configuration and maintenance of the OpenCom 510 (see
Loading the Online Help starting on page 92).
To Next Page
Loading...