Installation Safety Precautions
21
4. Installation
4.1 Safety Precautions
The CE symbol on the product confirms that it meets the requirements of the tech-
nical guidelines on user safety and electromagnetic compatibility valid at the time
of approval.
4.1.1 General Instructions
Please note: This product may be installed and serviced by qualified per-
sonnel only. Opening the housing and carrying out unautho-
rised repairs may damage the product and will invalidate the
warranty.
DANGER! Hazardous voltages inside the device!
The MPS+1-AC power supply unit may not be opened as this may lead to exposure
to hazardous voltage!
Defective power supply units must be sent to the manufacturer for repairs.
Always use the original packaging when packing OpenCom 510 components for
transport or storage.
CAUTIONT!
Static charge can damage the OpenCom 510. Before and du-
ring work on the electrical components of the OpenCom 510,
discharge any static electricity from your body and the tools
you are using.
To Next Page
Loading...