Modules MT+S2M1-1
74
Indicators
There are four LEDs on the front of the MT+S2M1-1 interface card.
MT+S2M1-1: LEDs
The LEDs indicate the following:
40 V
50 V
6–42 V
7Not used
8Not used
LED 1: Constantly yellow At least one connection established through
the interface card is active.
LED 2: Constantly green The interface card is operational; the slot has
been activated (flickering is normal).
Flashing yellow The interface card is ready, but the slot has not
been activated or the interface card has not
been configured yet.
Pin Number Assignment
S2M-42V
MT+S2M1-1
1
2
3
4
To Next Page
Loading...