Operation Manual / 4 Product description / A100-L
2 Removal and installation / 2.3 Installing the turbocharger
© Copyright 2020 ABB. All rights reserved. HZTL4034_EN Rev.R October 2020
2.3 Installing the turbocharger
2.3.1 Placing the turbocharger on the bracket
Fig.5: Placing the turbocharger
u Remove covers from the oil connections.
u Align turbocharger and place on engine bracket.
u Tighten the fixing screws (Steps for fastening the turbocharger →12) while only slightly
loosening the lifting gear.
u Remove lifting gear from turbocharger.
u Connect cable to speed sensor.
u Connect all gas, air and oil pipes.
Page 11 / 110