ABB AC-AP Series User Manual

Applicability
This manual applies to the following panel types and their versions:
ACH-AP-WACH-AP-HACS-AP-WACS-AP-I and
ACS-AP-S
Control panel type
A or laterC or laterA or laterC or laterHardware version
5.40 or later5.00 or later5.01 or later4.61 or laterSoftware version
You can also view panel details in the panel itself using either of the two methods:
•
With panel still not powered, press and hold (
?
) button, then power up the panel through
USB or drive.
Control panel
Product type: ACS-AP-I
HW version: D
FW version: GPAPI v5.80
or
• With panel powered up, go to Menu → System info → Control panel.
Note: The images and instructions in this manual are examples, each based on a specific
control panel and drive type combination. The details may vary with different control panels
or drive types.
Compatibility
The following drive(s) are compatible with these panel types.
ACH-AP-H,
ACH-AP-W
ACS-AP-WACS-AP-SACS-AP-IControl panel
type
ACH480, ACH580,
ACQ580
ACS380, ACS480,
ACS530, ACS560,
ACS580, ACQ580,
ACS860, ACS880
ACS380, ACS480,
ACS530, ACS560,
ACS580
ACS380, ACS480,
ACS530, ACS560,
ACS580, ACQ580,
ACS860, ACS880
Drive
Note: This table may not be comprehensive. See the appropriate drive manual for more
details.
10 Introduction to the manual

ABB AC-AP Series Specifications

General

Brand	ABB
Model	AC-AP Series
Category	Control Panel
Language	English