EasyManua.ls Logo

ABB AC-AP Series - Technical Data; What this Chapter Contains; Connectors; Display

ABB AC-AP Series
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical data 67
11
Technical data
What this chapter contains
This chapter contains the technical details of the Assistant control panel.
Connectors
The control panel has the following connectors:
Display
The control panel has a monochrome, 240 x 160 pixel resolution LCD display with
adjustable backlight and display contrast.
See Basic settings and assistants (page 30).
Connector Purpose
RJ-45 female
connector
Used for connecting the panel to drive.
If cable is used, then maximum length should be 100 meters (328 ft.)
.
On a panel bus, the combined maximum length of the panel bu
s
ca
bles should be 100 meters (328 ft.).
The panel bus can have a maximum of 32 nodes.
Type B mini USB
connector
Used for connecting panel to PC. It is intended for temporary service
use (USB 2.0, MTP protocol). The maximum cable length should be
three meters (9.8 ft.).
DMS documents: 3AXD00000587751,
3AXD10000371905

Table of Contents

Related product manuals