ActionsTask
Faults are automatically displayed. If you hide a fault by pressing
(Hide), it automatically reappears after 60 seconds of no key
presses. You can also view the fault through Options > Active
faults.
Hide/view an active fault.
Press
button to view the help page.
Open help page on a fault.
Press (Reset) to reset an active fault.
Reset an active fault.
Go to Menu → Event log → Faults.View tripping faults.
Warnings are automatically displayed. If you hide a warning by
pressing (Hide), it automatically reappears if the warning is
still active after 60 seconds of no key presses.
Hide/view an active warning.
Press (How to fix) or
button to view the help page.
Open help page on a warning.
Warnings disappear automatically once the condition that has
triggered it goes away.
Reset an active warning.
Go to Menu → Event log → Other events.View past warnings and faults.
■ Basic settings and assistants
ActionsTask
Press and hold , and press or .
Adjust backlight brightness.
Press and hold , and press or .
Adjust display contrast.
Go to Menu → Settings → Language.Change language.
Go to Menu → Settings → Date & time.Change time and date, and related settings.
Go to Menu → Assistants and select an assistant to launch.Launch an assistant.
■ Backups
ActionsTask
See Backups (page 44).
Create a backup.
Restore a backup. See Backups (page 44).
Restore a backup.
Basic operation 31