First start-up
To start-up the control panel for the first time, follow the instructions:
1. Obey all drive-specific safety precautions.
2.
Install the control panel. See instructions in Installation (page 14).
3. Power up the drive.
The control panel start-up begins automatically. Wait until the control panel shows the
language selection view.
4.
Use or to select a language.
5. Press to confirm your selection.
Wait until the control panel completes uploading the language file. The progress is
indicated by a progress bar.
If there is a Basic set-up assistant in the drive, or if the control panel already contains a
compatible backup (or backups) that could be copied to the drive, the control panel prompts
a question.
Installation and start-up 15
To Next Page
Loading...
Need help?
General
