52 Functions in the Options menu
Note: The data shown in the graph is not stored in the drive memory, that is, if
you remove or restart the control panel, the data is lost.
• Display decimals: Specifies how many decimals are shown.
• Display name: Enter a custom label to show in the Home view instead of the
parameter name.
• Min and Max: This function depends whether Scale value range is selected or
not:
• Scale value range not selected: Select the minimum and maximum signal
values that are shown on graph displays.
• Scale value range selected: Select the actual values of the parameter that
correspond to Display min as and Display max as (see below).
• Scale value range: Select if you want to specify the value range.
• Display min as and Display max as: Select the minimum and maximum
values shown in the Home view.
This feature allows application-specific scaling to be applied.
If the parameter value is below the minimum or above the maximum, the text
Off the scale is displayed. In the graph format, small arrows are shown instead
to indicate values off the scale.
• Display unit: Customize the unit shown in Home view when scaling is used.
Scaling with Display signal min/max as and Signal min/max
actual min actual max
actual value
Signal min Signal max
Display signal min as Display signal max as
0
-32767 32768
-3000 6000
-50.00 100.00
display value
To Next Page
Loading...
