5. Select the link “Show used visualizations”.
ð
The VisualizationManager editor and there the tab “Visualizations” opens. All screens
and dialog elements created in the project are visible.
Here, you can select which screens are enabled or disabled for web visualization.
If you want to select another screen as a start visualization, you must modify the adequate
parameter in the webvisu.htm file: <param name="STARTVISU" value="PLC_VISU">
5.4.11.3 Compile the project
Before logging-in to the CPU, you need to compile the complete code without any errors.
Example project > Enable web visualization
2021/06/293ADR010635, 2, en_US60
To Next Page
Loading...
