Fig. 4: Example: PM5072-T-2ETH
1 5 LEDs to display the states of the processor module (Power, Error, Run, MC, MOD1)
2 Micro memory card slot
3 Option board cover for option board slot
4 13-pin terminal block for I/O connectors
5 12-pin terminal block for I/O connectors
6 12 LEDs to display the states of the signals
7 10 LEDs to display the states of the signals
8 RJ45 female connector for Ethernet1 connection
9 RJ45 female connector for Ethernet2 connection
10 3-pin terminal block for power supply 24 V DC
11 2 holes for wall-mounting with screws
12 Cable binding
13 Cable binding accessory on the top of the housing (optional)
The processor module is shown with pluggable terminal blocks. These terminal
blocks must be ordered separately.
The cable binding accessory on the top of the housing is optional. Please use
TA5301-CFA accessory.
Processor modules > PM50xx
2021/06/29 3ADR010635, 2, en_US 67
To Next Page
Loading...
