ABB AC500-S - 2.2 Intended use

TU582-S
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
Spring-type terminal unit TU582-S for Safety I/O modules.
2.2 Intended use
The user shall coordinate usage of ABB AC500-S safety components in his applications with the competent
authorities and get their approval. ABB assumes no liability or responsibility for any consequences arising
from the improper use:
n Non-compliance with standards and guidelines
n Unauthorized changes to equipment, connections and settings
n Use of unauthorized or improper equipment
n Failure to observe the safety instructions in this guide
Overview of AC500-S Safety PLC
Intended use
30.03.2017 AC500-S 19