5. The project administrator has to set a user password for newly created CoDeSys Safety V2.3 project.
Go to “Project è User Group Passwords …” and set the password for Level 0 User Group, which shall
represent users from Safety User Group in PS501 Control Builder Plus V2.2.1 (or newer) / Automation
Builder 1.0 (or newer).
Fig. 90: Set passwords
6.
All User Management features of CoDeSys Safety V2.3 are available for project administrator (
Ä
AC500 User Documentation for further details).
The following PLC Browser commands (these commands can be called from CoDeSys Safety V2.3)
are supported by SM560-S Safety CPU:
? - List of available browser commands
Configuration and programming
System configuration and programming > Programming of AC500-S Safety CPU
30.03.2017AC500-S200
To Next Page
