Name Data Type Initial Value Description, Parameter Values
S_Mode2Sel BOOL FALSE Indicates that mode 2 is selected and acknowl-
edged.
FALSE: Mode 2 is not selected or not active.
TRUE: Mode 2 is selected and active.
S_Mode3Sel BOOL FALSE Indicates that mode 3 is selected and acknowl-
edged.
FALSE: Mode 3 is not selected or not active.
TRUE: Mode 3 is selected and active.
S_Mode4Sel BOOL FALSE Indicates that mode 4 is selected and acknowl-
edged.
FALSE: Mode 4 is not selected or not active.
TRUE: Mode 4 is selected and active.
S_Mode5Sel BOOL FALSE Indicates that mode 5 is selected and acknowl-
edged.
FALSE: Mode 5 is not selected or not active.
TRUE: Mode 5 is selected and active.
S_Mode6Sel BOOL FALSE Indicates that mode 6 is selected and acknowl-
edged.
FALSE: Mode 6 is not selected or not active.
TRUE: Mode 6 is selected and active.
S_Mode7Sel BOOL FALSE Indicates that mode 7 is selected and acknowl-
edged.
FALSE: Mode 7 is not selected or not active.
TRUE: Mode 7 is selected and active.
S_AnyModeSel BOOL FALSE Indicates that any of the 8 modes is selected and
acknowledged.
FALSE: No S_ModeX is selected.
TRUE: One of the 8 S_ModeX is selected and
active.
Error BOOL FALSE
Ä
Table 32 “General Output Parameters”
on page 267
DiagCode WORD 16#0000
Ä
Table 32 “General Output Parameters”
on page 267
Notes: The X in parameter names "S_ModeX" or "S_ModeXSel" is a placeholder for digits 0 to 7.
Configuration and programming
AC500-S Libraries > SafetyBlocks_PLCopen_AC500_v22.lib
30.03.2017 AC500-S 283
To Next Page
