This function block provides the two-hand control functionality (
Ä
EN 574, Section 4 Type II).
This function block provides the two-hand control functionality according to EN 574, Section 4 Type II. If
S_Button1 and S_Button2 are set to TRUE in a correct sequence, then the S_TwoHandOut output will also
be set to TRUE. The FB also controls the release of both buttons before setting the output S_TwoHandOut
again to TRUE.
Configuration and programming
AC500-S Libraries > SafetyBlocks_PLCopen_AC500_v22.lib
30.03.2017AC500-S306
To Next Page
Loading...
