318 Parameter listing and descriptions
ACH550-01 User's Manual
1 = DI1 – Enables the Interlock function, and assigns a digital input
(starting with
DI1) to the interlock signal for each PFA relay. These
assignments are defined in the following table and depend on:
• the number of PFA relays [number of parameters 1401…1403 and
1410…1412 with value = 31 (PFA)]
• the Autochange function status (disabled if 8118
AUTOCHNG INTERV =
0.0, and otherwise enabled).
Code Description Range
To Next Page
