ABB ACH550-01 - I;O Settings Mode

Start-up and control panel 91
ACH550-01 User's Manual
I/O settings mode
The I/O settings mode is used for viewing and editing the I/O
settings.
To view and edit the I/O settings, follow these steps:
1 Press MENU to go to the
main menu.
2 Scroll to I/O SETTINGS
with the UP/DOWN keys
and press ENTER.
3 Scroll to the I/O setting you
want to view with the UP/
DOWN keys and press
SEL.
4 Select the setting you want
to view with the UP/DOWN
keys and press OK.
5 You can change the value
with the UP/DOWN keys
and save it by pressing
SAVE.
If you do not want to
change the setting, press
CANCEL.
6 Press EXIT three times to
return to the main menu.
0 A
0 Hz
0 %0.
0.
0.
0.0Hz
OFF
MENU00:00
TIME & DATE
PAR BACKUP
I/O SETTINGS
EXIT ENTER00:00
OFF
MAIN MENU 7
DIGITAL INPUTS (DI)
ANALOG INPUTS (AI)
RELAY OUTPUTS (ROUT)
ANALOG OUTPUTS (AOUT)
PANEL
I/O SETTINGS 1
EXIT
SEL00:00
OFF
-DI1-
1001:START/STOP (E1)
1002:START/STOP (E2)
I/O SETTINGS
EXIT
OK
00:00
OFF
CANCEL SAVE00:00
1001 EXT1 COMMANDS
PAR EDIT
DI1
[1]
OFF
-DI1-
1001:START/STOP (E1)
1002:START/STOP (E2)
I/O SETTINGS
EXIT
OK00:00
OFF
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com