82 Start-up and control panel
ACH550-01 User's Manual
Group 99: START-UP DATA parameters and the internal
motor parameters.
User set 1 must be first saved using parameter 9902
APPLIC
MACRO and then uploaded to the control panel before
downloading is possible.
• DOWNLOAD USER SET 2 – Copies the parameters in user
set 2 from the control panel to the drive. As DOWNLOAD
USER SET 1 above.
• DOWNLOAD OVERRIDE SET – Copies the parameters in
the override set from the control panel to the drive.
The override must be first saved (automatically, as defined by
Group 17: OVERRIDE) and then uploaded to the control
panel before downloading is possible.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
