ABB ACS1000 - Main Circuit Breaker (MCB) Checklist; Input Transformer Checklist; Motor Checklist; Insulation Tests Checklist

08 COMMISSIONING
3BHS213401 E01 REV H ACS1000 AIR-COOLED USER MANUAL 109/184
8.1 Overview
The following sections provide an overview of the commissioning process for your drive.
8.1.1 Required qualification
8.1.2 Commissioning procedure
8.1.3 Commissioning checklist
8.1.4 Customer assistance
8.1.5 Customer acceptance
Commissioning, parameter adjustments and functional tests of the drive must be
carried out only by commissioning personnel certified by ABB.
Information on the commissioning procedure and the start conditions for
commissioning can be obtained from ABB.
In order to ensure uncomplicated and speedy commissioning, it is important that
drive and associated equipment are ready for commissioning. Reviewing and
completing the items in the “8.2 Commissioning checklist” on page 110 before the
commissioning personnel arrive on site will help to achieve this.
During the commissioning period, the customer is requested to provide qualified
personnel for assistance, who are:
- Experienced with medium and low voltage equipment and with the local
safety regulations
- Familiar with the driven process
- Authorized to operate associated medium and low voltage equipment (eg, main
circuit breaker, other low and medium voltage switchgear)
- Authorized to operate the driven process for functional tests
When commissioning has been completed, the commissioning report is signed by
the responsible commissioning personnel and by the customer as a sign of
acceptance. A copy of the report and a copy of the actual parameter settings are
handed out to the customer.