10 CDP CONTROL PANEL
3BHS213401 E01 REV H ACS1000 AIR-COOLED USER MANUAL 129/184
10.1 Overview
The panel messages and parameter settings used in this chapter are
typical examples to illustrate the related instructions and display
functions and can therefore differ from the actual messages and
parameter settings in the drive.
Figure 10-1: CDP control panel
(1) Display
(2) Status line
(3) Actual signal names and values
(4) Keypad
(5) Mode selection keys
(6) Fast navigation key for selecting the actual signals
display or the fault memory display
(7) Local / remote selection key
(8) Reset key
(9) Forward key
(10)Backward key
(11) Slow navigation key for selecting signals or
fault messages
(12)Enter key, terminates a procedure
(13)Reference key
(14)Start key
(15)Stop key
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1 L -> 600.0 rpm I
Status Running
MotorSpeed 600.00 rpm
Power 30.0 %
To Next Page
Loading...
