ABB ACS1000 - Starting the Drive after an Emergency-Off

09 OPERATION
3BHS213401 E01 REV H ACS1000 AIR-COOLED USER MANUAL 126/184
9.9.2 Starting the drive after an emergency-off
1. To start the drive after an emergency-off, unlatch the EMERGENCY-OFF pushbutton.
The EMERGENCY-OFF pushbutton returns to its initial position when turned into the
direction indicated by the arrows on the pushbutton.
2. To reset the emergency-off safety relay of the drive, press the RESET button on the
control keypad.
- After resetting, the status message of the drive changes to RdyForMCBOn.
- The main power supply can be connected to the drive and the drive can be started again.
LOC RESET REF
REM
1 L -> 0.0 rpm
Status RdyforMCBon
MotorSpeed 0.00 rpm
Power 0.0%