ABB ACS580MV - Replacing the Power Modules; Required Manpower and Tools; Replacement of a Power Module Frame Size R1 - R3

118 Maintenance
Replacing the power modules
WARNING! Obey the instructions in chapter Safety instructions. If you ignore
them, injury or death, or damage to the equipment can occur.
 Required manpower and tools
Two persons are required for replacing a power module.
The following tools are needed:
• Screwdrivers: M6, M8, M10, M12
• Torque wrench with extension bar
 Replacement of a power module frame size R1 - R3
The replacement procedure is basically the same for power modules of R1-R3. The main
difference is the weight of the module types. Replacement power modules must always be
of the same type.