Guidelines for planning the electrical installation 51
Guidelines for planning the
electrical installation
References
For instructions for planning the electrical installation of the drive and for the technical
requirements for the protection and control of the medium voltage supply see the
ACS580MV Engineering Guideline.
For selecting a specific drive type and options refer to ACS580MV Engineering Guideline.
Limitation of liability
The installation must always be designed and made according to applicable local laws and
regulations. ABB does not assume any liability whatsoever for any installation which
breaches the local laws and/or other regulations. Furthermore, if the recommendations
given by ABB are not followed, the drive may experience problems that the warranty does
not cover.
To Next Page
Loading...
