92 Operation
Overview on drive status and sequences
The following section lists the main operating states of the drive and the related indications
on the local control panel when the drive is put into operation (see Start sequence of the
drive), when it is stopped (see Stop sequence of the drive), or when a fault condition has
occurred.
For information on other status messages, such as fault status messages in particular, see
the ACS580MV primary control program firmware manual.
Status indications
The drive status is indicated with a status icon on the control panel.
Status icon Animation Drive status
- Stopped
- Stopped, start inhibited
Blinking Stopped, start command given but start inhibited
Blinking Faulted
Flashing Running, at reference, but the reference value is 0
Rotating Running, not at reference
Rotating Running, at reference
To Next Page
Loading...
