Introduction to the manual 21
Maintenance
The personnel include all persons who
• are qualified to carry out preventive and corrective maintenance on drive as described
in this manual
• are thoroughly familiar with the drive
• have a sound knowledge of the relevant electrical codes and specifications covering
low and medium voltage equipment
• are able to assess the hazards associated with the energy sources of the drive system
and act correspondingly
• know the safe shutdown and grounding procedures for the drive system.
Contents of the manual
This manual contains the instructions and information for the basic drive configuration.
Relevant chapters of the manual
Related manuals
See List of related manuals on the inside of the front cover.
User’s responsibilities
It is the responsibility of those in charge of the drive to ensure that each person involved in
the handling, installation, operation or maintenance of the drive has received the
appropriate training and has thoroughly read and clearly understood the instructions in this
manual and the relevant safety instructions.
Chapter Handling Installation Operation Maintenance
1Safety instructions XXXX
2Introduction XXXX
3 Function and hardware
description
XX
4 Control system and
interfaces
XX
5 Guidelines for planning the
electrical installation
X
6 Transportation, storage and
disposal
XX
7 Mechanical installation X
8 Electrical installation X
9 Installation checklist X
10 Operation X X
11 Fault tracing X
12 Maintenance X
13 Technical data X X
To Next Page
Loading...
