ABB ACS580MV - Unpacking and Inspection; Lifting and Transportation; General Notes on Transportation; Dimensions and Weights

54 Transportation, storage and disposal
Unpacking and inspection
1 Remove all packaging material carefully.
2 Check the drive and accompanying equipment for damages.
3 Compare the complete delivery with the purchase order and the packing list.
4 If parts are missing or damaged, immediately inform the shipping company and ABB.
It is recommended to photograph the damages and send the photographs to ABB.
Lifting and transportation
It is recommended to have the following information at hand before transporting the
cabinet:
• Chapter Technical data provides details on dimensions, weight, and of center of
gravity of the cabinet.
• Chapter Maintenance provides instructions if the door of the INU compartment cannot
be opened.
 General notes on transportation
• Drive components can be damaged during transportation. Therefore, transport the
cabinet in an upright position.
• Transport separated units only!
• Keep the doors closed to prevent dirt from entering. Metallic dust in particular can
cause damage and failure when the drive is energized.
 Dimensions and weights
• Choose the load capacity according to the following table， for center of gravity see
the ACS580MV Gravity Center for Packing.
Type
Drive unit Transformer unit
Height
(mm)
Depth
(mm)
Width
(mm)
Weight
(kg)
Height
(mm)
Depth
(mm)
Width
(mm)
Weight
(kg)
6/6.3R1 2571 1176 1815 1100 2571 1176 2215 1800
6/6.3R2 2571 1176 1815 1150 2571 1176 2215 1950
6/6.3R3 2571 1176 1815 1200 2571 1176 2215 2300
6/6.3R4 2571 1176 1815 1300 2571 1176 2215 2700
6/6.3R5 2571 1176 1815 1300 2571 1176 2215 3300
6/6.3R6 2571 1176 1815 1350 2571 1176 2415 3650
6/6.3R7 2571 1376 3015 2300 2571 1376 2615 4800
6/6.3R8 2571 1376 3015 2450 2571 1376 2615 6350
6/6.3R9 2571 1376 3015 2600 2571 1376 3215 7700
6.6R1 2571 1176 1815 1150 2571 1176 2215 1850
6.6R2 2571 1176 1815 1200 2571 1176 2215 2100