72 Electrical installation
• Galvanized plate (1 in figure below) with EMC cushions (2, 3, 4) and sealing grommets
(5). See ACS580MV Base frame & TEU layout design for details and for the possible
mounting variants.
Material for cable entry with EMC plate (bottom mounted)
The EMC cushions (1 in figure below) are mounted on the underside of the EMC plate
when entering cables from top. They are mounted on top of the EMC plate when entering
cables from underneath.
EMC cushion. See Preparing the cables for more information.
1 Lead through plate
2 Bracket
3 Bracket
4 EMC cushions
5 Sealing grommets
6 Opening in cable entry plate
4
5
1
3
2
6
To Next Page
Loading...
