ABB ACS850-04 - System Info

108 Parameters
08.07 Alarm word3 Alarm word 3. For possible causes and remedies, see
chapter Fault tracing.
-
08.08 Alarm word4 Alarm word 4. For possible causes and remedies, see
chapter Fault tracing.
-
09
09 System info
Drive type, program revision and option slot occupation
information.
09.01 Drive type Displays the drive type (for example, ACS850). -
09.02 Drive rating ID Displays the inverter type (ACS850-xx-…) of the drive.
0 = Unconfigured, 101 = 03A0, 102 = 03A6, 103 = 04A8,
104 = 06A0, 105 = 08A0, 106 = 010A, 107 = 014A,
108 = 018A, 109 = 025A, 110 = 030A, 111 = 035A,
112 = 044A, 113 = 050A, 114 = 061A, 115 = 078A,
116 = 094A, 117 = 103A, 118 = 144A, 119 = 166A,
120 = 202A, 121 = 225A, 122 = 260A, 123 = 290A,
124 = 430A, 125 = 521A, 126 = 602A, 127 = 693A,
128 = 720A
1 = 1
09.03 Firmware ID Displays the firmware name. E.g. UIFI. -
09.04 Firmware ver Displays the version of the firmware package in the drive, e.g.
E00F hex.
-
09.05 Firmware patch Displays the version of the firmware patch in the drive. 1 = 1
09.10 Int logic ver Displays the version of the logic on the main circuit board of
the drive.
-
No. Name/Value Description FbEq
Bit Name
0 Enc2 cable
1D2D comm
2 D2D buffer ol
3PS comm
4Restore
5 Curr meas calib
6 Autophasing
7 Earthfault
8 Autoreset
9 Motor nom value
10 D2D config
11 Stall
12 Load curve
13 Load curve conf
14 U/f curve conf
15 Speed meas
Bit Name
0 Option comm loss
1 Solution prog
2 Motor temp2